MADE IN CANADA / HARD ROCK TOUGHCRUSHER BACKING / LOCKING COMPOUNDS / SINCE 1964

02 / MAINTENANCE SOLUTION

LOCKING COMPOUND.
NO MOLTEN METAL.

A mix-and-pour material for locking bronze bushings in cone crushers, designed as an alternative to traditional molten-metal methods.

HARD ROCK TOUGH ✳

A SMARTER APPROACH

SECURE THE
BUSHING. SKIP
THE POUR.

HPZ Locking Compound is formulated to secure bronze crusher bushings without preparing and pouring molten zinc or babbitt.

The high-temperature, high-impact locking material is mixed and poured at room temperature according to product instructions. It has been used in the maintenance of cone crushers from several established equipment manufacturers.

APPLICATION NOTES

MADE FOR CRUSHER
MAINTENANCE.

01 / PROCESS

NO HOT-METAL POUR

Avoid the melting and pouring process required for traditional metallic locking methods.

02 / KIT

THREE COMPONENTS

Resin, filler and hardener are combined following the supplied instructions.

03 / WORKFLOW

MIX AND POUR

Designed for straightforward application without dedicated metal-melting equipment.

04 / SUPPORT

APPLICATION GUIDANCE

Contact HPZ to discuss material quantity, documentation and compatibility.

REFERENCE KIT

3.4 KG KIT.
115 CU. IN.

The standard 3.4 kg (7.5 lb) kit described in HPZ's published product information yields approximately 115 cubic inches (1,884 cm³) of mixed material.

Verify application-specific quantities and the most recent technical documentation with our team before ordering. Follow current SDS and product instructions.

CHECK YOUR APPLICATION ↗

LET’S WORK TOGETHER

KEEP YOUR OPERATION
MOVING.

Talk directly with our team about product selection, pricing or distribution.

REQUEST A QUOTE ↗

Crusher bushing locking compound for maintenance applications

HPZ Locking Compound is a three-component system for bronze crusher bushing installations. Its components are identified as Foundation, Resin and Hardener. The system provides an alternative to molten-metal locking methods where it is suitable for the application.

What is HPZ Locking Compound used for?

It is intended for securing bushings in crusher maintenance applications. Verify application suitability and installation procedures against the current HPZ directions and equipment requirements.

How is the compound prepared?

The Foundation, Resin and Hardener components must be used in accordance with the current HPZ mixing and application instructions. Do not substitute unverified ratios or cure times.

Technical documents

Ask HPZ about a locking compound application or browse technical resources.